设计简介
摘要:为了使水资源在农业灌溉中的有效利用,开发新型的农业节水灌溉系统可克服传统灌溉方式的不足,本设计建立了现代化的农业喷灌模型,通过设计计算,由于各环行区域的面积不同,所需的水的流量不同,在喷灌系统中使用多个不同的喷管,则可根据喷管中喷嘴的直径不同来控制水的流量,从而使圆区的喷灌均匀,另外,采用铸铁管路大大减少了水的损失.在喷管系统中采用
集中控制,自动化程度高,易于调节.
Abstract : For making water resource valid used in agricultural irrigation ,to develop
new-type agricultural water-saving irrigation system can overcome the shortcomings of the traditional way of
irrigating .This design sets up the modernized
agricultural sprinkling irrigation model. because the area
of every belt area is different, the flow of the necessary water is different.
Using a lot of different nozzle among sprinkling irrigation system, it is possible to make
round sprinkling irrigation of district even, according to
nozzle with controlling the flow of water diameter of spray nozzle ,in addition , it casts the iron pipe distance and reduces losses of ink greatly to adopt. Adopting centralized control in
the nozzle system, the automatic degree becomes high and easy to regulate .
Key words: flux
目录
序 言 ……………………………………………………………1
第一章 弧齿锥齿轮加工原理及其铣刀盘简介…………………3
1.1弧齿锥齿轮加工原 …………………………………3
1.2弧齿锥齿轮铣刀盘介绍 ……………………………5
第二章 夹具总体方案设计………………………………………8
2.1铣刀盘在夹具上的定位和夹紧 ……………………8
2.2工件座的设计 ………………………………………8
2.3夹具要完成的动作 …………………………………9
2.4分度装置的方案分析设计与选择…………………10
2.5 转角机构的方案设计……………………………16
2.6 夹具体方按设计…………………………………17
第三章 误差分析 ………………………………………………20
3.1定位误差分析………………………………………20
3.2分度误差分析………………………………………23
第四章 运动分析 ………………………………………………27
第五章 结论 ……………………………………………………29
致 谢……………………………………………………………30
参考文献…………………………………………………………31
集中控制,自动化程度高,易于调节.
Abstract : For making water resource valid used in agricultural irrigation ,to develop
new-type agricultural water-saving irrigation system can overcome the shortcomings of the traditional way of
irrigating .This design sets up the modernized
agricultural sprinkling irrigation model. because the area
of every belt area is different, the flow of the necessary water is different.
Using a lot of different nozzle among sprinkling irrigation system, it is possible to make
round sprinkling irrigation of district even, according to
nozzle with controlling the flow of water diameter of spray nozzle ,in addition , it casts the iron pipe distance and reduces losses of ink greatly to adopt. Adopting centralized control in
the nozzle system, the automatic degree becomes high and easy to regulate .
Key words: flux
目录
序 言 ……………………………………………………………1
第一章 弧齿锥齿轮加工原理及其铣刀盘简介…………………3
1.1弧齿锥齿轮加工原 …………………………………3
1.2弧齿锥齿轮铣刀盘介绍 ……………………………5
第二章 夹具总体方案设计………………………………………8
2.1铣刀盘在夹具上的定位和夹紧 ……………………8
2.2工件座的设计 ………………………………………8
2.3夹具要完成的动作 …………………………………9
2.4分度装置的方案分析设计与选择…………………10
2.5 转角机构的方案设计……………………………16
2.6 夹具体方按设计…………………………………17
第三章 误差分析 ………………………………………………20
3.1定位误差分析………………………………………20
3.2分度误差分析………………………………………23
第四章 运动分析 ………………………………………………27
第五章 结论 ……………………………………………………29
致 谢……………………………………………………………30
参考文献…………………………………………………………31
