设计简介
摘要
本次设计是非石棉垫片压延成张机设计的设计。在这里主要包括:机架系统的设计、链传动系统的设计、调整机构系统的设计、的设计。这次毕业设计对设计工作的基本技能的训练，提高了分析和解决工程技术问题的能力，并为进行一般机械的设计创造了一定条件。整机结构主要由电动机产生动力通过联轴器将需要的动力传递到小链轮上，小链轮带大链轮，从而带动整机运动，非石棉垫片压延成张机更显示其优越性，有着广阔的发展前途。
本论文研究内容：
(1) 非石棉垫片压延成张机总体结构设计。
(2) 非石棉垫片压延成张机工作性能分析。
(3)电动机的选择。
(4) 非石棉垫片压延成张机的传动系统、执行部件设计。
(5)对设计零件进行设计计算分析和校核。
(6)绘制整机装配图及重要部件装配图和设计零件的零件图。
关键词：非石棉垫片压延成张机， 联轴器，滚珠丝杠
Abstract
This design is the design of non asbestos gasket calendering machine design. Here mainly include: the frame of system design, the design of the chain transmission system, adjusting mechanism of system design, design. The graduation design on the design of the basic skills training, improve the analysis and the ability to solve engineering problems, and create a certain condition for general mechanical design.
The whole structure is produced mainly by motor power through the coupling will need to transfer the power to the small chain wheel, chain wheel chain wheel, so as to drive the movement of non asbestos gasket, rolling into a machine but also show its superiority, there are broad prospects for the development.
The content of this paper:
(1) of non asbestos gasket sheet rolling machine overall structure design.
(2) of non asbestos gasket sheet rolling machine performance analysis.
(3) the choice of motor.
(4) non asbestos gasket transmission system, rolling into a machine component design.
(5) the design of parts of the design calculation and check.
(6) the assembly drawing and parts drawing assembly drawings and parts drawings design.
Keywords: non asbestos gasket rolled into a machine, coupling, ball screw
目录
摘 要 2
Abstract 3
1 绪论 5
1.1 非石棉垫片压延成张机选题背景 5
1.2 非石棉垫片压延成张机课题的意义 5
1.3 垫片压延机研究现状及工作原理 5
1.4本课题的研究内容和所需解决的问题 6
2 总体方案设计 8
2.1 设计方案选型与分析 8
2.2 方案的确定 8
3 非石棉垫片压延成张机的参数计算 9
3.1驱动电机的选型 9
3.2 传送链的设计 13
3.3 链传动设计设计过程 14
3.4非石棉垫片压延成张机轴的设计 16
3.4.1 驱动轴的设计 16
3.4.2 链轮轴的设计 18
3.5 轴承的选型及校核 21
3.6 链强度计算 23
3.6.1 链传动的运动特性 23
3.6.2 链传动的动载荷 24
3.6.3 链传动的受力分析 25
3.6.4 滚床链轮接触强度的计算 26
4 非石棉垫片压延成张机的其他部件设计 28
4.1非石棉垫片压延成张机的驱动装置 28
4.2 链的张紧装置 28
4.3链轮 30
结 论 31
致 谢 32
参考文献 33
The whole structure is produced mainly by motor power through the coupling will need to transfer the power to the small chain wheel, chain wheel chain wheel, so as to drive the movement of non asbestos gasket, rolling into a machine but also show its superiority, there are broad prospects for the development.
The content of this paper:
(1) of non asbestos gasket sheet rolling machine overall structure design.
(2) of non asbestos gasket sheet rolling machine performance analysis.
(3) the choice of motor.
(4) non asbestos gasket transmission system, rolling into a machine component design.
(5) the design of parts of the design calculation and check.
(6) the assembly drawing and parts drawing assembly drawings and parts drawings design.
Keywords: non asbestos gasket rolled into a machine, coupling, ball screw
目录
摘 要 2
Abstract 3
1 绪论 5
1.1 非石棉垫片压延成张机选题背景 5
1.2 非石棉垫片压延成张机课题的意义 5
1.3 垫片压延机研究现状及工作原理 5
1.4本课题的研究内容和所需解决的问题 6
2 总体方案设计 8
2.1 设计方案选型与分析 8
2.2 方案的确定 8
3 非石棉垫片压延成张机的参数计算 9
3.1驱动电机的选型 9
3.2 传送链的设计 13
3.3 链传动设计设计过程 14
3.4非石棉垫片压延成张机轴的设计 16
3.4.1 驱动轴的设计 16
3.4.2 链轮轴的设计 18
3.5 轴承的选型及校核 21
3.6 链强度计算 23
3.6.1 链传动的运动特性 23
3.6.2 链传动的动载荷 24
3.6.3 链传动的受力分析 25
3.6.4 滚床链轮接触强度的计算 26
4 非石棉垫片压延成张机的其他部件设计 28
4.1非石棉垫片压延成张机的驱动装置 28
4.2 链的张紧装置 28
4.3链轮 30
结 论 31
致 谢 32
参考文献 33
