设计简介
气瓶是一种常用的气体储备装置，广泛应用于工业生产和人民生活中。但是它却具有潜在的危险性，一旦发生爆炸或泄漏，就会给人们带来灾难。所以气瓶的优化设计技术已经成为世界各国研究的热点。国内对气瓶的设计还存在机理研究不深入、设计流程不规范等问题。针对该领域开展研究具有重要的理论意义与实用价值。本文在对气瓶现有的结构、原理详细分析的基础上，设计了M500A气瓶的整体结构，并运用SolidWorks软件对M500A气瓶的主要部件进行了三维建模，总体装配，最后是生成工程图。同时参考国内外文献，总结、制定了M500A气瓶的设计流程，为气瓶的规范化设计提供了指导。
关键词 气瓶 总体设计 三维建模 工程分析
Abstract
The gas cylinder is a kind of air storage equipments. It is used extensively in industrial production and normal life. But it is dangerous potentially, It will bring a disaster to people, once the explosion or leakage occurred. So research on the optimizing technology of the gas cylinder has already become a little bit hot in the world. But in China, there still exist many problems in the design of the gas cylinder, such as less study on its mechanism, less standardization on design process and so on. In this paper, on the basis if the existing researches, the total structure of the M500A gas cylinder is designed on the platform of SolidWorks. The 3D models of the main parts of M500A gas cylinder are modeled. The final assembly is finished and the engineering diagram is also completed. In the end, the design process is determined by contrast to the domestic and international references. It will be useful for the design standardization of the gas cylinder.
Keywords Gas cylinder Total design 3D modeling Engineering analysis
目 录
1 引言 ………………………………………………………………………………1
1.1 三维设计的背景和意义 ………………………………………………………1
1.2 国内外气瓶的发展概况 ………………………………………………………2
1.3 本课题的具体工作 ……………………………………………………………2
2 M500A气瓶的总体设计 ……………………………………………………………3
2.1 M500A气瓶材料的选择 …………………………………………………………3
2.2 M500A气瓶的总体结构及其工作原理 …………………………………………3
2.3 M500A气瓶主要零件的设计要点 ………………………………………………4
3 M500A气瓶的三维造型 ……………………………………………………………7
3.1 SolidWorks软件介绍 ……………………………………………………………7
3.2 瓶盖的三维造型 …………………………………………………………………8
3.3 瓶身的三维造型 …………………………………………………………………10
3.4 瓶底的三维造型 …………………………………………………………………10
3.5 内管的三维造型 ……………………………………………………………………11
3.6 进气管、排气管的三维造型 ………………………………………………………13
3.7 VCR接头的三维造型 ………………………………………………………………15
3.8 清洗阀的三维造型 …………………………………………………………………19
4 M500A气瓶的装配和工程分析 ………………………………………………………20
4.1 虚拟装配 ……………………………………………………………………………20
4.2 装配方法 ………………………………………………………………………… 20
4.3 装配体爆炸视图……………………………………………………………………23
4.4 装配体工程视图 ……………………………………………………………………24
4.5 气瓶的焊接工艺 ……………………………………………………………………24
结束语 ……………………………………………………………………………………26
致谢 ………………………………………………………………………………………27
参考文献 …………………………………………………………………………………28
关键词 气瓶 总体设计 三维建模 工程分析Abstract
The gas cylinder is a kind of air storage equipments. It is used extensively in industrial production and normal life. But it is dangerous potentially, It will bring a disaster to people, once the explosion or leakage occurred. So research on the optimizing technology of the gas cylinder has already become a little bit hot in the world. But in China, there still exist many problems in the design of the gas cylinder, such as less study on its mechanism, less standardization on design process and so on. In this paper, on the basis if the existing researches, the total structure of the M500A gas cylinder is designed on the platform of SolidWorks. The 3D models of the main parts of M500A gas cylinder are modeled. The final assembly is finished and the engineering diagram is also completed. In the end, the design process is determined by contrast to the domestic and international references. It will be useful for the design standardization of the gas cylinder.
Keywords Gas cylinder Total design 3D modeling Engineering analysis
目 录
1 引言 ………………………………………………………………………………1
1.1 三维设计的背景和意义 ………………………………………………………1
1.2 国内外气瓶的发展概况 ………………………………………………………2
1.3 本课题的具体工作 ……………………………………………………………2
2 M500A气瓶的总体设计 ……………………………………………………………3
2.1 M500A气瓶材料的选择 …………………………………………………………3
2.2 M500A气瓶的总体结构及其工作原理 …………………………………………3
2.3 M500A气瓶主要零件的设计要点 ………………………………………………4
3 M500A气瓶的三维造型 ……………………………………………………………7
3.1 SolidWorks软件介绍 ……………………………………………………………7
3.2 瓶盖的三维造型 …………………………………………………………………8
3.3 瓶身的三维造型 …………………………………………………………………10
3.4 瓶底的三维造型 …………………………………………………………………10
3.5 内管的三维造型 ……………………………………………………………………11
3.6 进气管、排气管的三维造型 ………………………………………………………13
3.7 VCR接头的三维造型 ………………………………………………………………15
3.8 清洗阀的三维造型 …………………………………………………………………19
4 M500A气瓶的装配和工程分析 ………………………………………………………20
4.1 虚拟装配 ……………………………………………………………………………20
4.2 装配方法 ………………………………………………………………………… 20
4.3 装配体爆炸视图……………………………………………………………………23
4.4 装配体工程视图 ……………………………………………………………………24
4.5 气瓶的焊接工艺 ……………………………………………………………………24
结束语 ……………………………………………………………………………………26
致谢 ………………………………………………………………………………………27
参考文献 …………………………………………………………………………………28
