您好,欢迎来到机械CAD网!
客服QQ:20425042

首页 > 机械机电 >

设计名称
QTZ100塔式起重机简易升降装置设计【水平起重臂架,小车变幅,上回转自升式多用途塔机,最大幅度60m,最大起重量8t,
设计编号
JX1996
设计软件
AutoCAD,Word
包含内容
见右侧图片
说明字数
见下方截图
图纸数量
见右侧图片
推荐指数
较高
价格
价格优惠中
整理日期
2018-01-02
整理人
admin
设计简介
摘  要
 
针对现有塔式起重机没有配备专门的升降装置,工作人员上下机全靠徒手攀爬,极大的增加了工作人员的劳动强度,浪费更多的时间在攀爬塔式起重机上。易造成工作人员不必要的身体疲劳,影响工作效率,很不符合人性化的设计标准。为了改善这种状况,减轻工作人员的负担,节省工作准备时间,提高工作质量。本设计通过对塔式起重机塔身结构的研究、结合各类提升装置的特点,设计出一种依附于塔式起重机内部,专供塔式起重机工作人员上下机使用的简易升降装置。
关键字:塔式起重机;升降装置;人性化设计
 
ABSTRACT
 
To direct at the tower crane has not been equipped with a specialized lifting device and the staff climb the tower crane up and down all by hand, which greatly increases the staff's labor intensity, makes them waste more time in climbing tower crane and makes it easy to bring the staff unnecessary physical fatigue that affects their work efficiency. All in all, it doesn’t conform to the humanized design standard. In order to improve this condition, reduce the burden of the staff, save the preparation time in work and improve the work quality, based on the study of tower crane tower structure and the combination of the characteristics of all kinds of lifting devices, this design puts out a simple lifting gear which attaches to the interior tower crane is only used by the staff for climbing the tower crane up and down.
Key words: tower crane; Lifting gear; humanized

目    录
第一章 绪论 1
第二章 升降机总体方案的选择 2
2.1 概述 2
2.2 吊笼结构的设计 2
2.3 导轨的设计 3
第三章 钢丝绳的选用 5
3.1 概述 5
3.2 钢丝绳的结构选用 5
3.2.1 钢丝绳接触方式的选用 5
3.2.2 钢丝绳的捻向 5
3.2.3 钢丝绳具体选用 6
第四章 起升机构的结构设计 8
4.1 电动机的选择 8
4.2 卷筒的选择计算 8
第五章 减速器的设计计算 10
5.1 确定总传动比及分配传动比 10
5.2 计算运动和动力参数 11
5.2.1 各轴的功率 11
5.2.2 各轴的转速 12
5.2.3 各轴的转矩 12
5.3 设计带传动的主要参数 13
5.4 齿轮传动设计 16
5.4.1 齿轮类型的选择 16
5.4.2 高速轴齿轮计算 16
5.4.3 低速轴的齿轮计算 20
5.5 轴的设计计算 23
5.5.1 高速轴Ⅰ设计 24
5.5.2 轴Ⅱ的设计计算 25
5.5.3 轴Ⅲ的设计计算 27
5.6 滚动轴承的选择及计算 31
5.6.1 Ⅰ轴轴承的计算 31
5.6.2 Ⅱ轴轴承的计算 31
5.6.3 Ⅲ轴轴承的计算 32
5.7 联轴器的选择计算 33
5.7.1 联轴器的选择要点 33
5.7.2 选择联轴器 34
5.7.3 凸缘联轴器的主要尺寸计算 34
第六章 结论 36
参考文献 37
致   谢 38
部分图纸截图
展开
  • 在线咨询
  • QQ:20425042
  • QQ:99872184
  • 技术支持
  • 售后服务