您好,欢迎来到机械CAD网!
客服QQ:20425042

首页 > 机械机电 >

设计名称
母线槽参数检测机构传动系统设计【说明书+CAD】
设计编号
JX2346
设计软件
AutoCAD,Word
包含内容
见右侧图片
说明字数
见下方截图
图纸数量
见右侧图片
推荐指数
较高
价格
价格优惠中
整理日期
2017-08-22
整理人
admin
设计简介
 
摘    要
母线槽是一种新型配电导线,它的两个主要技术参数是指绝缘强度和导线的电阻。论文根据自动检测母线槽导电片电阻和导电片之间绝缘强度的要求,主要介绍了母线槽参数检测机构中气压传动控制系统的设计方法、过程参数和结果等,另外还介绍了步进电机驱动电路的设计。
本传动机构共有六个动作需要由气压传动装置控制,需要八只气缸。其中,两只气缸控制母线槽两端测量头的伸缩;两只气缸控制测量头横向定位;两只气缸控制母线槽长度方向定位;两只气缸控制母线槽的升降(然后对其进行包装)。论文涉及到各个气压传动回路图的设计,各个气缸及辅助元件的相关尺寸的计算,接着是控制回路中的各种气压元件的选择。另外还计算出了普通型单活塞双作用气缸的各个参数值,并设计出了它的结构图。
设计五相十拍步进电动机驱动电路时选择了89C2051作为环形分配器,而功率器件选用电压型的VMOS管。该电路设计成恒流斩波电路,论文中大概介绍了步进电机的相关知识和基本工作原理,并详细介绍了斩波恒流细分驱动方案的原理。此外,本次设计还分别对相序分配的硬件接线和软件程序部分做了设计和说明。
关键词:母线槽;气压传动;步进电机驱动器
ABSTRACT
The Bus duct is a new kind of lead for electric conductivity,The two of main techniques of the Bus duct are Insulation Strength and Resistance of wires. According to the requirements of automatically detecting the resistance of conducting plates and the insulation strength between them, The design of Pneumatic Transmission system and Stepping Motor Drive Control Circuits for the Bus duct Parameter Detection machine are introduced in this thesis. In addition, the design of Step Motor Drive Control Circuits is introduced.
The Pneumatic Transmission setup has six actions which need to be controlled by Pneumatic Transmission. Eight Cylinders are needed. Two of them are used for controlling the flex of the detection. Two are used for controlling transverse orientation of the detection .Two are used for controlling orientation in length of the Bus duct. Another two are used for controlling the up and down of the Bus duct(preparing for packing it). Then the thesis comes down to designing drawings of the loops in Pneumatic Transmission system ,and the size of Cylinders and device relationally are calculated in this thesis, with that devices of Cylinders control system are chosen. In addition, each parameter of the medium-sized Cylinder with sole piston are calculated, and it’s drawing of structure is designed.
When designing the step motor drive circuit of 5 phase 10 pat,89C2051 is adopted as the Loop allotter. The VMOS is adopted in power elements. It is designed as chopper-type constant current circuit.  In the thesis the related knowledge and basic principle of the step motor drive are probably introduced , and a principle of a scheme is introduced in detail, which is of the chopper-type constant current subdivide.On top of that, In this design , the hardware connection and software program of the Phase Sequence allotter are design and elucidation respectively.
Key words:  Bus duct;Pneumatic Transmission ;step motor driver 
目   录
第一章 绪论 1   
1.1 引言 1
   1.2 选题的背景及意义 1
   1.3母线槽简介 2
   1.4检测内容 3
1.5 自动检测系统的组成及控制流程 5
1.5.1 母线槽参数检测系统的组成 5
1.5.2 母线槽参数检测系统的工作流程 5
第二章 气压传动系统设计与计算 9
2.1气压传动概述 9
2.1.1气动技术的应用 9
2.1.2气压传动的组成及工作原理 9
2.1.3气压传动的优缺点 10
2.2 气压传动系统控制对象 10
2.3 总气压传动系统回路设计 11
2.3.1选择总气压回路的控制方式 11
2.3.2选择气压发生装置与辅助元件 11
2.3.3选择执行元件 11
2.3.4选择控制元件 13
2.3.5设计总气压传动回路 15
2.4包装台纵向定位装置气压传动回路设计与计算 16
2.4.1 回路设计 16
2.4.2 回路计算 16
2.4.3 元件选择 18
2.5 检测台侧向定位装置气压传动回路设计与计算 19
2.5.1 回路设计 19
2.5.2 回路计算 19
2.5.3 元件选择 21
2.6 测量头动作控制气压传动回路设计与计算 22
2.6.1 回路设计 22
2.6.2 回路计算 22
2.6.3 元件选择 23
2.7 包装台升降机构气压传动回路设计与计算 24
2.7.1 回路设计 24
2.7.2 回路计算 25
2.7.3 元件选择 26
2.8 气缸设计 26
2.8.1 气缸的主要尺寸设计 26
2.8.2 气缸的主要结构设计 27
第三章 驱动电路设计 30
3.1 步进电机的种类以及工作原理 30
3.1.1 步进电机的种类 31
3.1.2 步进电机的工作原理 31
3.2 控制方案拟定 32
3.3 步进电动机相序分配电路 33
3.3.1 相序分配电路 33
3.3.2 相序分配软件 35
3.4 步进电机驱动电路设计 38
第四章 结论 41
4.1 论文总结 41
4.2 感想 42
致谢 43
参考文献 44
部分图纸截图
展开
  • 在线咨询
  • QQ:20425042
  • QQ:99872184
  • 技术支持
  • 售后服务